22
23
PROBLEM
•
This is normal.
•
Steam is released at different stages of the cycle
for each option.
Cannot see steam
vapor at the
beginning of cycle.
•
MORE TIME pressed.
•
Pressing the MORE TIME button adjusts the
load size from 1to 5 articles or a big load
indicated by in the display.
The display shows:
•
STEAM FRESH™ did
not remove odor
completely.
•
Fabrics containing strong odors should be washed in
a normal cycle.
Odors remain in
clothing after
STEAM FRESH™.
POSSIBLE CAUSES
SOLUTIONS
DISPLAY
Thermistor of blower
housing
Outlet thermistor open or shorted.
tE1
CHECKING PART
CAUSE
•
tE1 error is displayed in the
drying cycle or test mode.
Thermistor of blower
housing
Outlet thermistor open or shorted.
tE2
•
tE2 error is displayed in the
drying cycle or test mode.
Thermistor of steam
generator
Steam generator thermistor open
or shorted.
tE4
•
tE4 error is only displayed in the
test mode.
•
Replace the steam generator.
Water supply pump
When the pump valve is less than
10 in the test mode
E5
PS
EE
•
tE5 error is only displayed in the
test mode.
•
Check the connection between
harness wire and connector.
•
Replace the water supply pump.
Steam generator
Wire Connection
(Black-White-Red)
EE PROM Error
Sensors do not detect that steam
generator is full within 60 seconds.
Wire Connection is wrong.
Wire Connection is loose.
EE PROM operation is adnormal.
•
If water in the steam feeder is
EE error is displayed only in the
test mode
not enough this error may be
displayed. Fill the feeder and
restart the cycle.
•
verify proper connection of the
power cord. (Electric dryer only.)
* PS means power supply.
REMARK
8-3. Display Fault/Error Codes
The error codes below will be displayed when attempting to start a drying cycle or after
activating the Diagnostic Test mode.
FOR LG TECHNICIAN
nC
NFC module
NFC module open or shorted
nC is displayed only in the
test mode
nU
NFC module
NFC module is wrong
nU is displayed only in the
test mode
22
Before using the Tag On function
- The Tag On function allows you to conveniently
use the LG Smart DiagnosisTM and Cycle
Download features to communicate with your
appliance right from your own smart phone.
To use the Tag On function:
1. Download the LG Smart Laundry&DW App to
your smart phone.
2. Turn on the NFC (Near Field Communication)
function in your smart phone.
The Tag On function can only be used with smart
phones equipped with the NFC function and based
on the Android operating system (OS).
1. Enter the "Settings" menu of
the smart phone and select
"Share & Connect" under
"WIRELESS & NETWORKS."
Look for the Tag On icon next to the LED screen
on the control panel. This is where you position
your smart phone when using the Tag On function
with the LG Smart Diagnosis™, Cycle Download,
and Laundry Stats features of the LG Smart
Laundry&DW application.
When you use the Tag On function, position your
smart phone so that the NFC antenna on the back
of your smart phone matches the position of the
Tag On icon on the appliance. If you do not know
the position of your NFC antenna, move your smart
phone very slightly in a circular motion until the
application verifies the connection.
Because of the characteristics of NFC,
if the transmission distance is too far, or if there is
a metal sticker or a thick case on the phone,
transmission will not be good.
Press in the LG Smart Laundry&DW app
for a more detailed guide on how to use the Tag
On function.
2. Set "NFC“ and “Direct/
Android Beam” to ON,
and select “NFC".
3. Check "Use Read and
Write/P2P receive".
•
Turning on the NFC function of the
smart phone
•
The Tag On guide
The Tag On icon
Tag On position
Depending on the smart phone manufacturer
and Android OS version, the NFC activation
process may differ. Refer to the manual of
your smart phone for details.
NOTE
1
2
1
2
?