30
OPERATION
Control Panel
1
2
3
4
5
6
7
1
POWER Button
Press the button to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE
•
Pressing the
POWER
button during a cycle will
cancel that cycle and any load settings will be lost.
2
START/PAUSE Button
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
•
If you do not press the
START/PAUSE
button to
resume a cycle within 60 minutes, the dryer turns off
automatically and all cycle settings are lost.
3
Time and Status Display
The display shows the settings, estimated time
remaining, options, and status messages for the
dryer.
4
Cycle Option Buttons
Press each of these buttons to select additional cycle
options. Press and hold any button marked with an
asterisk for 3 seconds to activate a special function.
5
More Time/Less Time Buttons
Use these buttons with the Time Dry and other
Manual Dry cycles to adjust the drying time. Press
the
More Time
button to increase the selected
manual cycle time by 1 minute; press the
Less Time
button to decrease the cycle time by 1 minute.
6
Cycle Modifier Buttons
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to view
and select other settings.
7
Cycle Buttons
Press the Cycle button repeatedly to scroll through
the cycle selections until the desired cycle is
selected. The standard presets for the selected
cycle will be shown in the display. On MANUAL DRY
cycles, these settings can be adjusted using the cycle
modifier buttons any time before starting the cycle.
Summary of Contents for Dle1501 series
Page 46: ...46 MEMO ...
