117
standard operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all tested frequency bands.
Although SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the maximum value.
Because the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the closer you are
to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the body) as required
by the FCC for each model estimated SAR value for this model phone when
tested for use at the ear is 1.23 W/kg and when worn on the body, as
described in this user guide, is 0.848W/kg (body-worn measurements differ
among phone models, depending upon available accessories and FCC
requirements). While there may be differences between SAR levels of various
phones and at various positions, they all meet the government requirement
for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on file with the FCC and
can be found under the Display Grant section of http://www.fcc.gov/oet/fccid
after searching on FCC ID BEJLX350. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) website at http://www.wow-com.com. In the
United States and Canada, the SAR limit for mobile phone used by
the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
DM-L200_LGManual_1.1.qxd 9/18/06 5:04 PM Page 117