Defrost Operation/FULL Mark/Operating thed Timer/Humidity Setting
14
Defrost Operation
Defrost Operation
When the water bucket becomes full, the
operation automatically stops and FULL
Indicator lamp lights up.
• After emptying the bucket, when the bucket is replaced,
FULL Indicator Lamp will turn itself off, and automatically
the operation starts.
• When the water is FULL, Mode conversion is not possible.
W
W
ater FULL Indication
ater FULL Indication
• During Operation, "( )" are displayed and defrosting starts
automatically. (At this time, operation sound changes.)
• When room temperature becomes below about 15°C,
defrosting is executed once per 30 minutes for 5 minutes
depending on room temperature (at the most).
Operating the TIMER
Operating the TIMER
Empty the bucket, and reset the time.
When the bucket gets full of water during TIMER operation, "FULL" indicator will light up and fanning will stop.
Be sure to check if the unit is running.
Press the TIMER button.
• Since TIMER converts in the following sequence, select the time setting.
(1 hour interval)
• For every hour, the residual hours diminishes one by one.
• When time selected elapses, operation stops.
To cancel TIMER
• Press the TIMER button until <No Indication> is displayed.
No Indication (Cancel Setting)
Humidity Setting
Humidity Setting
Press the Temperature Select Button.
• Select Lamp will light up. • For every pressing.
When the air reaches the humidity of your choice,
the Dehumidifier will stop running.
Be sure to check if the unit is running.
To dehumidify room automatically
