7
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or
electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following:
•
Do not, under any circumstances, cut or
remove the ground prong from the power cord.
To prevent injury to persons or damage to the dryer,
the electrical power cord must be plugged into a
properly grounded outlet.
•
For personal safety, this dryer must be properly
grounded.
Failure to do so can result in electric
shock or injury.
•
Refer to the installation instructions in this
manual for specific electrical requirements for
your model.
Failure to follow these instructions
can create an electric shock hazard and/or a fire
hazard.
•
This dryer must be plugged into a properly
grounded outlet. Electric shock can result if
the dryer is not properly grounded. Have the
wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded.
Failure to follow these instructions
can create an electric shock hazard and/or a fire
hazard.
•
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
The dryer should always be plugged into its
own individual electrical outlet which has a
voltage rating that matches the rating plate.
This
provides sparkling performance and also prevents
overloading house wiring circuits which could cause
a fire hazard from overheated wires.
•
Never unplug your dryer by pulling on the
power cord. Always grip plug firmly and pull
straight out from the outlet.
The power cord can
be damaged, resulting in a risk of fire and electric
shock.
•
Repair or replace immediately all power
cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at either
end.
The power cord can melt, creating an electric
shock and/or fire hazard.
•
When installing or moving the dryer, be careful
not to pinch, crush, or damage the power cord.
This will prevent injury and prevent damage to the
dryer from fire and electric shock.
SAVE THESE INSTRUCTIONS
Summary of Contents for DF20WV2EW
Page 46: ...Memo ...
Page 92: ......
