background image

24

6. Drying

To assist drying, we recommend that the 

door be partially opened after the cycle.

     The display will indicate Cd(cool dry) for a 

further 60 minutes after the end of the cycle 

time. It can be interrupted or terminated by 

simply opening the door.

The use of rinse aid is recommended for 

optimum drying results.

Select the Extra Hot option to get better 

drying results.

HOW TO USE AND OPERATE

When the salt container is empty, the salt refill 

lamp will automatically turn on during 

operation. The salt should be refilled after the 

cycle has finished. We recommend the salt refill 

should always be carried out, as mentioned on 

previous page, prior to starting the next 

operation. This will immediately thin and drain 

away any excess salt solution.

■ 

For refilling Salt

NOTE

•   After filling with salt, it may take a little 

while before the indicator light turns off.

•  When the control is set to  , it is not 

necessary to fill up with salt as no salt is 

consumed while the dishwasher is 

operating. If the control is set between  

 and  , then salt must be added to the 

salt container.

•   Do not pour detergent into the salt 

container

. This will destroy the water 

softener.

WARNING

When the lamp is lit, this means that the 

salt aid is almost empty. Refill the Salt 

Aid chamber as soon as possible.

Summary of Contents for D1417WFB





































Reviews: