LG CX670, User Manual

Page: 126 / 280

Consumer Information
on SAR (Specific
Absorption Rate)
This Model Phone Meets
the Government’s
Requirements for
Exposure to Radio Waves.
Your wireless phone is a radio
transmitter and receiver. It is
designed and manufactured not
to exceed the emission limits
for exposure to radiofrequency
(RF) energy set by the Federal
Communications Commission
(FCC) of the U.S. Government.
These limits are part of
comprehensive guidelines and
establish permitted levels of RF
energy for the general
population. The guidelines are
based on standards that were
developed by independent
scientific organizations through
periodic and thorough evaluation
of scientific studies. The
standards include a substantial
safety margin designed to
assure the safety of all persons,
regardless of age and health.
The exposure standard for
wireless mobile phones
employs a unit of measurement
known as the Specific
Absorption Rate, or SAR. The
SAR limit set by the FCC is
1.6W/kg. * Tests for SAR are
conducted using standard
operating positions specified by
the FCC with the phone
transmitting at its highest
certified power level in all tested
frequency bands.
Although SAR is determined at
the highest certified power
level, the actual SAR level of the
phone while operating can be
well below the maximum value.
Because the phone is designed
to operate at multiple power
levels to use only the power
required to reach the network,
in general, the closer you are to
a wireless base station antenna,
the lower the power output.
Before a phone model is
available for sale to the public, it
must be tested and certified to
the FCC that it does not exceed
the limit established by the
government adopted
requirement for safe exposure.
The tests are performed in
positions and locations (e.g., at
the ear and worn on the body)
as required by the FCC for each
model.
124
Safety