LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. Calibration & RF Auto Test Program
- 148 -
10.1.2 Setup file (Info_Db.txt)
/*cal*/[Default]=[CU575]
/*cal*/[CU575]=[..\\Cal_Model\\CU575\\LG_RfCal_Qu CU575 Ag_099.dll]
/*auto*/[CU575]=[..\\RF Auto\\Rf_AutoMain_Ver1114.dll]
[ezlooks]=[off]
[batcal]=[off]
[svc]=[off]
[standalone]=[off]
[tescom]=[off]
[process]=[cal]
[CU575]=[..\\Auto_Model\\CU400\\Procedure_CU575_102.xml,..\\Auto_Model\\ CU575
\\Spec_CU575_101.xml,..\\Auto_Model\\CU400\\AutoSetup_100.xml]
1: Indication of ‘cal process’ or ‘auto process’
2: Model name which is displayed on Hot Kimchi program
3: Relative path of Main Sequence dll file from Hot_KimchiD.exe
4: You can change this as ‘on’ or ‘off’(should be in lower case; on, off)
5: You can change this as ‘auto’ or ‘cal’(should be in lower case; on, off)
6: Auto model name
7: Relative path of auto model procedure, spec, setting file from Hot_KimchiD.exe
‘on’ or ‘off’. (use only lower case)
‘auto’ or ‘cal’. (use only lower case)
1
2
3
4
5
6
7
