LG CU500 - Cell Phone Service Manual Download Page 127

Page: 127 / 186

5. DOWNLOAD

- 128 -

Log Extractor is designed to extract log information from handset and store log related files in the

selected root path in PC. This function is very useful for debugging. Select Log Extractor from the

Tools of the file menu, and connect the phone with LGMDP by clicking on the Connect button. When

clicking on the Connect button, this checks if the appropriate files such as LFAPP/RecMngr.bin, err

directory, Debugging_Tip.txt, or Hidden_info.bin are placed on the handset. If they are exist, then

appropriate check boxes are checked accordingly. Select directory to store log files by clicking on the

°¶ button.

Summary of Contents for CU500 - Cell Phone



























































































































































































Search results

Summary of Contents for CU500 - Cell Phone

Reviews:

Related manuals for CU500 - Cell Phone

Brands by name

Popular brands

LG CU500 - Cell Phone, Service Manual

Search results

Summary of Contents for CU500 - Cell Phone

Reviews:

Related manuals for CU500 - Cell Phone

Brands by name

Popular brands