LG CU405 Service Manual Download Page 129

Page: 129 / 176

LGE Internal Use Only

Only for training and service purposes

5.4 Caution

1) Multi-downloading using the USB hub is not recommendable.

2) If you see the message ‘cal mode’ after ‘completing download’, you must do NV

restore and image (media and module) download.

3) In emergency mode, you can not download the media and module image. So if you

want download media and module image, connect the phone normal mode after
emergency mode download, and then you can do it.

4) The NV data saved at LGMDP folder like this.

5) Recommended that the Module and Media Image have to be downloaded at the

same time.

6) Erase EFS option will erase everything (media, module, nv items, and user data) in

the EFS area.

5. DOWNLOAD

- 130 -

D:\LGMDP\004400-01-429926\_COM17_

LGMDP folder name

IMEI number

Port number

Summary of Contents for CU405























































































































































Search results

Summary of Contents for CU405

Reviews:

LG CU405, Service Manual, Page: 129 / 176

Search results

Summary of Contents for CU405

Reviews: