LG CRD-8484B, Owner'S Manual

Page: 7 / 14

E-7
Installing the Drive
Before installing the drive, turn off the system power. Follow the steps below to
install the CD-ROM drive:
1. Remove the cover from your computer system. Refer to manual for the
computer for details about removing the cover.
2. Insert the CD-ROM drive unit into a free 5.25-inch drive bay. Secure the
CD-ROM drive to the drive bay rails with the mounting screws (supplied).
3. Connect the 4-pin power cable and 40-pin IDE interface cable to the back of
the CD-ROM drive.
Notes: If there is no spare power cable available in the computer, you will have
to purchase a splitter cable of a suitable type.
The red edge of the IDE cable corresponds to pin 1 of the IDE interface on the
CD-ROM drive.
Please Note:
an IDE cable is not supplied and may be required to be purchased
separately.
If the computer is using a sound card, the drive is connected to the sound card
with an audio cable. This CD-ROM drive is supplied with a Creative Labs
SoundBlaster© compatible audio lead, if this is not suitable for your sound card,
it maybe necessary for you to purchase a suitable lead from your retailer. Refer
to the manual for the sound card for detailed information regarding connection.
Câble audio
Bande rouge
Câble
d’alimentation
Câble IDE
Audio Cable
IDE cable
Red Strip
Power Cable