1-8
1. Check the download
fi
le name.
MICOM
Mpeg
EQ
File Name
CM9730_”version”.HEX
HE004_”version”.BIN
EQ_PRG.BIN
* There is the Update File only in the USB storage.
2. Copy the download
fi
le to the USB storage.
3. Insert the USB storage on USB1 or USB2 Function.
4. VFD Display
1) MICOM
: “WRITE XX”
2) Mpeg
: “FIRMWARE”
3) EQ
: “EQ DOWN”
5. Complete Update
1) When the Set is turned off automatically after display "UPDATED", remove the USB storage.
2) Unplugged the power cord after display "FINISHED", then remove the USB storage.
Upgrade required time
Upgrade required time is determined depending on the Writing time considering the Download stability.
MICOM
Mpeg
EQ
Upgrade time
about 60sec
about 15sec
about 5sec
PROGRAM UPGRADE GUIDE
Summary of Contents for CM9730
