Operating
20
Oper
ating
3
Radio Operations
Be sure that FM antenna is connected.
(Refer to page 15)
Listening to the radio
1. Press
FUNCTION
until FM appears in the display
window.
The last received station is tuned in.
2. Auto tuning : Press
TUNING -/+
on the remote
control or
Y/U
on the unit for about 2
seconds until the frequency indication starts
changing, then release. Scanning stops when
the unit tunes in a station.
Manual tuning: Press
TUNING -/+
on the
remote control or
Y/U
on the unit
repeatedly.
3. Adjust the volume by pressing
VOL +/-
on the
remote control or by rotating volume knob on
the unit repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press
FUNCTION
until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING-/+
on the remote control or
Y/U
on the unit.
3. Press
PROGRAM/MEMORY
. A preset number
will blink in the display window.
4. Press
PRESET·FOLDER
W
/
S
to select the
preset number you want.
5. Press
PROGRAM/MEMORY
on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET·FOLDER
W
/
S
or
0
to
9
numerical
buttons.
Deleting all the saved stations
1. Press and hold
PROGRAM/MEMORY
for two
seconds. “ERASEALL” will blink in the unit display.
2. Press
PROGRAM/MEMORY
to erase all saved
radio stations.
Improving poor FM reception
Press
d
/
M
on the remote control or
T
on the
unit. This will change the tuner from stereo to
mono. Then the reception will be better than
before.
CM4340P-FV.DAUSLLK_ENG_0125.indd 20
2014-03-07 1:37:53
