Operating
23
Oper
ating
2
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold
TIMER
to set the alarm function.
3. Alarm sound sources will blink. While each of
sound sources blink, select the one you want by
pressing
I
ENTER
or
RDS/SET
.
4. “ON TIME” will blink. This is your desired time to
turns unit on. Press
Y/U
to change the
hours and minutes and press
I
ENTER
or
RDS/
SET
to save.
5. The “OFF TIME” will blink. This is your desired
time to turn unit off. Press
Y/U
to change
the hours and minutes and press
I
ENTER
or
RDS/SET
to save.
6. The volume setting will blink. Press
Y/U
to change the volume and press
I
ENTER
or
RDS/SET
to save.
7. Press
TIMER
to check the alarm information.
8. If you want to reset the clock, press and hold
TIMER
.Then repeat step 3-6.
y
If you unplug the cord from an outlet, the
clock setting you set won’t be stored.
y
If you synchronize the unit with your BT
device for clock by using BT app, you can
set 12 - Hour Time (ex - PM 11 : 00) or 24 -
Hour Time (ex - 23 : 00).(Android O/S only)
y
If you set the clock, you can check the time
by pressing
CLOCK
although the player is
turned off.
y
If you set the clock and alarm, you can
check setting informaiton by pressing
TIMER
although the unit is turned off. Then
this function will work in everyday.
y
Alarm function only works when the unit is
turned off.
y
When the alarm rings, you can deactivate
the alarm by pressing
TIMER
.
y
If the alarm rings with USB cable connected
to USB port, the function switches to tuner
function. (Depending on the type of device,
this may not be available.)
,
Note
Advanced Operation
Recording on USB
1. Connect the USB device to the unit.
2. Select a function by pressing
FUNCTION
on the
remote control or
F
on the unit.
One track/file recording - You can record a track/
a file on USB while playing the file you want.
All tracks/files recording - You can record tracks/
files on USB in stop state.
Program list recording - After making program
list, you can record it on USB.
(Refer to the page 17)
3. Start the recording by pressing
USB REC
on the
remote control.
4. To stop recording, press
I
ENTER
.
Pausing recording
During recording, press
USB REC
to pause
recording. Press it again to restart recording. (Only
FM/ Portable function)
To select recording bit rate
and speed
1. Press
USB REC
for longer than 3 seconds.
2. Use
Y/U
to select the bit rate.
3. Press
USB REC
again to select the recording
speed.
4. Press
Y/U
to select a desired recording
speed. (CD Function Only)
X1 SPEED
- You can listen to music while recording it.
(Audio CD Only)
X2 SPEED
- You can just record the music file.
5. Press
USB REC
to finish the setting.
CM3330B-BK.DGBRLLK_ENG.indd 23
2013-02-18 8:32:27
