CM-400 User Manual English
To establish a wireless connection, please follow the instructions
If the mouse LED is blinking blue, please replace the batteries.
If the mouse is not working
1)
Make sure the mouse power is on(turn-on/working)
2)
Check the battery capacity and installation.
3)
Click bind button one time shortly.
4)
Check receiver installation.
5)
Try another USB port.
Battery Power Saving
When not using the mouse, press the power button on the bottom of
mouse for 3~5 seconds to shut down the mouse power for battery
power saving. Then, press the power button for 1 to 3 seconds to
re-start the mouse power.
Battery replacement indicator LED and low power mode of the
mouse for prolonged use
After being used for quite a while, the battery voltage drops. The
lower power indicator LED (located on the upper area of the mouse)
also turns on blue at about 80% of battery power used. When the LED
is turned on, replace the battery as soon as possible. If the batteries
are not replaced, the mouse cursor movement slows down.
(Mouse may not work until batteries are replaced)
Summary of Contents for CM-400
Page 5: ......
