manualshive.com logo in svg

LG CineBeam PH30N, Owner'S Manual

Share
Download
LG CineBeam PH30N Owner'S Manual Download Page 49

7

ENGLISH

ENTERTAINMENT

Using SCREEN SHARE

1 

Set the external input of the projector to [SCREEN SHARE].

2 

Enable related SCREEN SHARE function on the device you wish to connect.

3 

Connect the projector from the search list on the device you wish to connect. 

4 

If the desired device accepts the request, SCREEN SHARE will be started.

 

NOTE

• 

When using the SCREEN SHARE function, it is compatible with Miracast 

supported devices with Windows 10 or higher, but it may not be compatible 

with some PCs.

• 

Ice Cream Sandwich, Jellybean, Kitkat, Lollipop, Marshmallow and Nougat 

versions of LG’s Android devices are guaranteed to be compatible.

• 

When connecting via SCREEN SHARE, place the device close to the projector.

• 

The response rate and image quality may vary depending upon the user’s 

environment.

• 

For more information on the device you want to connect to, refer to its owner’s 

manual.

• 

Some buttons on the remote control may not work in the [SCREEN SHARE] 

mode.

Summary of Contents for CineBeam PH30N















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands