LG CineBeam Laser Owner'S Manual Download Page 106

Page: 106 / 171

ENGLISH

Supported File Formats

File Extension

Supported Version

XLS, XLSX

Microsoft Office 97/2000/2002/2003/2007/2010/

2013/2016 version

DOC, DOCX
PPT, PPTX
TXT

PDF

Adobe PDF 1.0/1.1/1.2/1.3/1.4 version

HWP

Hangul 2007 version

•

File Viewer realigns a document, so it may look different from what is displayed

on a PC.

•

For documents that include images, the resolution may look lower during the

realigning process.

•

If the document is large or has many pages, it may take longer to load.

•

Unsupported fonts may be replaced by other fonts.

•

The file viewer may not open for Office documents that contain many high

resolution images. In that case, reduce the image file size, save it on a USB

storage device and run the file viewer again or connect your PC to the projector

and open the file on your PC.

Summary of Contents for CineBeam Laser












































































































































































Search results

Summary of Contents for CineBeam Laser

Reviews:

Brands by name

Popular brands

LG CineBeam Laser, Owner'S Manual

Search results

Summary of Contents for CineBeam Laser

Reviews:

Brands by name

Popular brands