5
ENGLISH
•
When moving the projector, make
sure to switch it off and remove the
power plug and cords.
-
The power cord may be
damaged, resulting in fire or
electric shock.
•
Do not place the projector on an
unstable or vibrating surface such
as a wobbly shelf or a slope.
-
It may fall and cause injury.
•
Be careful not to tip the projector
over when connecting external
devices to the projector.
-
This may cause personal injury or
damage to the projector.
Power
WARNING
•
DISCONNECTING THE DEVICE
FROM THE MAIN POWER
-
The Power plug is the
disconnecting device. In case of
an emergency, the Power Plug
must remain readily accessible.
•
The grounding wire should be
connected. (Except for devices
which are not grounded.)
-
Ensure that you connect the
grounding cable to avoid electric
shock. If it is not possible to
ground the unit, have a qualified
electrician install a separate
circuit breaker. Do not try
to ground the projector by
connecting it to telephone wires,
lightning rods or gas pipes.
•
The power plug should be inserted
fully into the power outlet.
-
An unstable connection may
cause a fire.
•
Do not place heavy objects on the
power cord.
-
This may result in fire or electric
shock.
•
Never touch the power plug with
wet hands.
-
This may result in electric shock.
•
Do not plug too many devices into
one multi-power outlet.
-
This may result in fire due to the
power outlet overheating.
•
Keep the AC adapter, power plug,
and the used power outlet clean
from dust or foreign materials
building up.
-
This may result in fire.
•
If there is any smoke or a burning
smell from the projector or AC
adapter, stop using the product
immediately. Disconnect the power
cord from the power outlet, and
then contact the customer service
center.
-
This may result in fire.
•
To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
