manualshive.com logo in svg

LG CineBeam HU715QW, Owner'S Manual

Share
Download
LG CineBeam HU715QW Owner'S Manual Download Page 20

20

ENGLISH

To Register the Magic Lighting Remote

You must pair the Magic Lighting Remote with the projector to use it.
Pair the Magic Lighting Remote prior to use as follows.

1 

Put batteries into the Magic Lighting Remote and turn the Projector on.

2 

Point the Magic Lighting Remote at your projector and press the 

 Wheel 

(OK)

 on the remote control.

• 

If the projector fails to register the Magic Lighting Remote, try again after 

turning the projector off and back on.

To Re-register the Magic Lighting Remote

1 

Press the 

 and 

 buttons at the same time, for five seconds, to unpair 

the Magic Lighting Remote with your projector.

2 

Press the 

 Wheel (OK)

 button towards the projector to re-register the 

Magic Lighting Remote.

• 

Hold the remote control towards the projector and press the 

 and 

 (Q. 

Settings)

 buttons at the same time more than 5 seconds until instructions 

appear. The previously registered remote control is deregistered and then 

registered again.

Summary of Contents for CineBeam HU715QW





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands