4
Location and Function of Controls
Front Panel
1. SATA Power Connector (15 pin)
2. SATA Data Connector (7 pin)
Rear Panel
1. Disc Tray
2. Drive activity indicators
The LED is used to indicate the operation of
BD-ROM/DVD Rewriter.
3. Emergency Eject Hole
4. Eject Button
1 2
❏
Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other
CD drives. These unreadable discs may need to be read using the CD-R/RW drive they
were created with.
❏
Please note:
Certain software (i.e. particularly those including Video playback) may
require a considerably increased specification PC to give acceptable results. While this
BD-ROM/DVD Rewriter can read DVD-video or BD-MV(BD-ROM) discs, decoding them to
display on your pc’s monitor requires separate MPEG, H.264 or VC-1 decoding that is done
by separate hardware (either an MPEG, H.264 or VC-1 decoder card or MPEG, H.264 or
VC-1 decoding done by your video card), or separate software that you install to do
MPEG, H.264 or VC-1 decoding. For further details, refer to the documentation that
comes with MPEG, H.264 or VC-1 software.
1
2
4
3
Summary of Contents for CH10LS20
Page 14: ...11 ...
