19
System setup
2-6. Power management setup
Your computer has ACPI Standby State in the system setup set to S3(STR) to man-
age power more effectively in standby mode. Use the power button to exit standby
mode. If you want to use a keyboard stroke or mouse movement to exit standby
mode, change S3(STR) to S1(POS).
Note: S1(Power On Suspend), S3(Save to Ram)
1. Start the CMOS Setup Utility. Use the arrow keys to select Power Management
Setup and then press Enter.
2. Use the arrow keys to select ACPI Standby State, and PageUp and PageDown
keys to set S1(POS).
3. Press F10 to save the new setting.
4. If the following message appears, press Enter.The computer restarts.
CMOS Setup Utility-Copyright(C) 1984-2001 Award Software
Power Management Setup
ACPI Function
[Enabled]
Item Help
Suspend Type
[Stop Grant]
Menu Level
MODEM Use IRQ
[3]
Suspend Time Out
[Disabled]
HDD Power Down
[Disabled]
Power Button Function
[Disabled]
Wake-Up on PEM
[Disabled]
Wake-Up on Ring
[Disabled]
Wake-Up on LAN
[Disabled]
USB THRM-Throttling
[50%]
Resume by RTC Alarm
[Disabled]
Date (of Month) Alarm
0
Time (hh:mm:ss) Alarm
00:00:00
Power on Function
[Button Only]
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit
F1:Help F5:Previous Values F7:Optimized Defaults
SAVE to CMOS and EXIT(Y/N)? Y
S1(POS)
ACPI Standby State
Summary of Contents for CG
Page 1: ......