- 11 -
O
Deflection Data Adjustment (Line SVC-1)
NOTE:
To enter SVC mode, press "OK" buttons on both TV set
and the Remote control at the same time.
1. Preparation for Deflection Adjustment
1) At SVC mode, press the Yellow colored button.
If the Remote Controller doesn't have the Yellow button, you
should use a Service Remote Control (105-201G) and press
SVC button.
And then, deflection data adjustment OSD (SVC1 mode) will
be displayed.
2) Press Channel UP/DOWN button for desirous function
Adjustment.
3) Press Volume UP/DOWN button to adjust the data.
2. Deflection Adjustment Procedure
1) Vertical Adjustment
Slect VS and adjust until the mechanical center of CPT and
that of screen coincides and select VA and adjust to coincide
the inner circle of screen with outer frame of CPT.
2) Horizontal Adjustment
Select HS and adjust until the mechanical center of CPT and
that of screen coincides.
3) Vertical S Correction Adjustment
Select SC and adjust until top-bottom side pincushion are
equal.
4)
Press OK(
V
) button to memorize the data.
3. Deflection Initial Setup Data
O
White Balance Adjustment.(LINE SVC-0)
NOTE :
This adjustment should be performed after screen voltage
adjustment.
1) Tune the TV set to receive an 100% white pattern.
2) Press OK(
V
) buttons on TV set and remote controller at the
same time to get into SVC mode.
3) Press Channel UP/DOWN button for desirous function
adjustment.
4) Adjust VOL+ or VOL- button for GG031.
5) Adjust VOL+ or VOL-button in each status of "Rg--"/"Bg--" for
X=281
!
8, Y=288
!
8 with color analyzer.
6) Press OK(
V
) button to memorize the adjustment data.
O
Hold Down check
Short J139 and ZD747 and check if the TV set turns into stand-
by.
O
HOTEL TV Mode
NOTE:
This mode is useful for HOTEL TV MODEL. Dealer or
HOTEL manager can use this option.
1. AFTER SELECTING HOTEL MODE, CAN NOT CHANGE
INITIAL SET UP CONDITION.
- CHANNEL PROGRAM(AUTO PROGRAM, MANUAL
PROGRAM, EDIT FUNCTION) and OSD LANGUAGE
set up condition is fixed so the HOTEL lodger cannot
change and remove initial set up data condition at his
pleasure.
This function prevents HOTEL lodger from needless
changing channel memory data and OSD language
condition.
It will be helpful for maintainning the best suitable
condition of TV SET
2. Limit MAX. VOLUME LEVEL.
- The HOTEL lodger can only use limited range of volume
level because loud TV sound can disturb other lodger's
private business.
The HOTEL manager select maximum volume level
proper for HOTEL.
3. Only Audio without Video source available through A/V
input
- When the Audio signal is fed to A/V input jack, the Audio is
available without Video.
In the previously existing Model, sound is muted if thereÕs
no Video signal.
G
HOTEL mode operating guide
1) SET UP(CH.SEARCH AND EDIT) the Channel Program
2) SET UP Proper max volume level in SVC Mode.
3) SET UP HOTEL option in SVC Mode(OPTION-2).
Status
RG
GG
BG
Initial Data
32
31
27
Remark
Adjustment
R-Drive
G-Drive
B-Drive
VL
VS
VA
HS
SC
34
25
43
36
10
Status
Default
34
25
43
36
10
21" LG
34
25
43
36
10
20" LG
Summary of Contents for CF-20/21S12EH
Page 28: ...SVC SHEET 3854V A0079A S ...
