- 12 -
¡
White Balance Adjustment.(LINE SVC-1)
NOTE : This adjustment should be performed after screen voltage
adjustment.
1) Tune the TV set to receive an 100% white pattern.
2) Press OK(
¡Æ
) buttons on TV set and remote controller at the
same time to get into SVC mode.
3) Press Yellow button on remote controller. (Standard mode)
4) Press Channel UP/DOWN button for desirous function
adjustment.
5) Adjust VOL+ or VOL- button for GG031.
6) Adjust VOL+ or VOL-button in each status of "Rg--"/"Bg--" for
X=293
¡
8, Y=295
¡
8 with color analyzer.
7) Press OK(
¡Æ
) button to memorize the adjustment data.
¡
Deflection Data Adjustment (Line SVC-2)
NOTE: To enter SVC mode, press "OK" buttons on both TV set
and the Remote control at the same time.
1. Preparation for Deflection Adjustment
1) At SVC mode, press the Yellow colored button.
If the Remote Controller doesn't have the Yellow button, you
should use a Service Remote Control and press SVC button.
And then, deflection data adjustment OSD (SVC1 mode) will
be displayed.
2) Press Channel UP/DOWN button for desirous function
Adjustment.
3) Press Volume UP/DOWN button to adjust the data.
2. Deflection Adjustment Procedure
VL (Vertical Linearity)
Adjust so that the boundary line between upper and lower half
is in accord with geometric horizontal center of the CPT.
VA (Vertical Amplitude)
Adjust so that the circle of a digital circle pattern may be
located within the effective screen of the CPT.
SC (Vertical “S” Correction)
Adjust so that all distance between each horizontal lines are
to be the same.
VS (Vertical Shift)
Adjust so that the horizontal center line of a digital circle
pattern is in accord with geometric horizontal center of the
CPT.
HS (Horizontal Shift)
Adjust so that the vertical center line of a digital circle pattern
is in accord with geometric vertical center of the CPT.
Press OK(
¡Æ
) button to memorize the data.
3. Deflection Initial Setup Data
¡
LINE SVC-3 Adjustment
¡
PSM Data
Status
RG
GG
BG
Initial Data
28
31
25
Remark
Adjustment
R-Drive
G-Drive
B-Drive
ITEM
FP(FM Mono Sound Prescale)
NP(NICAM Prescale)
SP(Scart Audio Input Prescale, AV1)
S1 VOL
S2 COL
Data
20
80
17
93
93
VL
VA
VS
HS
SC
33
33
33
35
11
Status
Default
21" SEB
20" SEB
A
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
100
55
70
60
Adjust
Data
PSM Mode
90
50
50
50
60
50
50
50
STANDARD
MILD
DYNAMIC
50
60
60
30
80
60
50
50
GAME
USER
