background image

18

Air Conditioner

Maintenance and Service

Removal of Filters

Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and Allergy Free Filter by slightly pulling downwards.

Plasma filter

Front panel

Don't touch this plasma filter within 10 seconds after opening the inlet grille, it may cause an electric shock.

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.

Never use any of these 
• Water hotter than 40°C. It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.

Air Filters

The air filters behind the front panel / grill should be checked and cleaned once in every
2 weeks or more often if necessary. To remove the filters see the self explanatory
diagrams for each model type. Clean the filters with a vacuum cleaner
or warm soapy water. If dirt is not easily removed, wash with a solution
of detergent in luke warm water. Dry well in shade after washing and
reinstall the filters back in place.

Plasma Filter

The plasma filters behind the air filter should be checked and cleaned once in every 3 months or more
often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the
filters with a vacuum cleaner. If it is dirty wash it with water and dry well in shade an install back in place.

Allergy Free Triple Filter

Remove the Allergy Free Triple Filter behind the air filter and expose
them in direct sunlight for 2 hours. 
And then insert these filters into original position.

Maintenance and Service

Indoor Unit

Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and 
unplug the power cord.

Summary of Contents for CC18AWU






















Reviews: