background image

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Installation MUST conform with local building codes or, in the absence of local codes, with

the Nation Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical
Code Part1 CSA C.22.1.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-

ure to do so may result in electric shock or product failure. 

• Contact an authorized service center when you install or relocate the air conditioner. Failure to

do so may result in serious injury or product failure.

• Always use a power plug and socket with a ground terminal.Failure to do so may result in

electric shock or product failure

• Install the panel and the cover of the control box safely. Failure to do so may result in explo-

sion or fire.

• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure

to do so may result in electric shock or product failure.

• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-

ure to do so may result in electric shock or product failure. 

• Do not modify or extend the power cable. If the power cable or cord has scratches or skin

peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

• Be cautious when you unpack or install the air conditioner. Failure to do so may result in seri-

ous injury or product failure.

• Contact an authorized service center when you install or relocate the air conditioner. Failure to

do so may result in serious injury or product failure.

• Do not install the air conditioner on an unstable surface or where there may be a danger of it

falling. It may result in death, serious injury, or product failure.

!

!

!

3

ENGLISH

Summary of Contents for CA09AWR






















Reviews: