background image

Owner's Manual 

5

Safety Precautions

Do not use the product for special purposes,

such as preserving foods, works of art, etc. It

is a consumer air conditioner, not a precision

refrigeration system. 

• There is risk of damage or loss of property.

Do not block the inlet or outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do not use

harsh detergents, solvents or splashing

water etc . 

• There is risk of fire, electric shock, or damage

to the plastic parts of the product.

Do not touch the metal parts of the

product when removing the air filter. 

• There is risk of personal injury.

Do not step on or put anyting on the

product. (outdoor units)

• There is risk of personal injury and failure of

product.

Always insert the filter securely after

cleaning. Clean the filter every two weeks

or more often if necessary.

• A dirty filter reduces the efficiency.

Do not insert hands or other objects

through the air inlet or outlet while the

product  is operating.

• There are sharp and moving parts that could

cause personal injury.

Be cautious when unpacking and

installing the product.

• Sharp edges could cause injury.

If the  refrigerant gas leaks during the

repair, do not touch the leakaing

refrigerant gas.

• The refrigernat gas can cause frostbite (cold

burn)

Do not tilt the unit when removing or

uninstalling it.

• The condensed water inside can spill .

Do not mix air or gas other than the

specified refrigerant used in the system . 

• If air enters the refrigerant system, an

excessively high pressure results, causing

equipment damage or injury.

If the refrigerant gas leaks during the

installation, ventilate the area immediately.

• Otherwise it can be harmfull for your health.

Dismantling the unit, treatment of the

refrigerant oil and eventual parts should

be done in accordance with local and

national standards.

Replace the all batteries in the remote

control with new ones of the same type.

Do not mix old and new batteries or

different types of batteries. 

• There is risk of fire or product failure.

Do not recharge or disassemble the

batteries. Do not dispose off batteries in

a fire. 

• They may burn or explode.

If the liquid from the batteries gets onto

your skin or clothes, wash it well with

clean water. Do not use the remote if the

batteries have leaked.

• The chemicals in batteries could cause burns

or other health hazards.

Do not let the air conditioner run for a

long time when the humidity is very high

and a door or a window is left open.

• Moisture may condense and wet or damage

furniture.

Do not expose your skin  or kids or

plants to the cool or hot  air draft.

• This could harm to your health.

If you eat the liquid from the batteries,

brush your teeth and see doctor. Do not

use the remote if the batteries have

leaked.

• The chemicals in batteries could cause burns

or other health hazards.

Do not drink the water drained from the

product.

• It is not sanitary and could cause serious

health issues. 

Use a firm stool or ladder when cleaning,

maintaining or repairing  the product at

an height.

• Be careful and avoid personal injury.

Summary of Contents for BSNQ126B7M2

























Reviews: