LG BPM54 Service Manual Download Page 21

Page: 21 / 91

3-8

DIGITAL DISPLAY & MEDIA TRAINING MASTER

Does the BD on-screen

menu appear?

YES

In case of customer use composite cable please make sure selecting

available resolution in the menu of the BD player, composite video can just

support 480i/p. In case of composite output is black please push the stop

button at the remote controller about 5 sec for changing 480p resolution.

What cables is the customer

using to connect the BD?

YES

Determine what cables the customer is using to connect the BD

to the TV and if connected properly. Refer to OM for connections.

Tighten any loose cables. Make sure the customer is not connecting a

BD to VCR or BD to DVD Recorder. Copy protection can distort

the picture on older VCR models.

Is the TV set to

the correct input?

YES

Make sure the TV is on the correct input.

Turn TV off, then on to determine input. Video when using composite,

or component. DVI when using DVI, and HDMI when using HDMI.

Is the customer able to

watch TV programming?

YES

If the customer is not able to watch television then he may have a

problem with his television, especially if the cable signal comes

through on a different input. If the customer can not get a TV program,

then he still may have a problem with the particular input on his TV.

Can the customer connect

the BD to another TV?

YES

Have the customer connect the BD to another TV in order to

determine if the problem is the BD or the TV. Refer to the OM for

connections assistance. If the BD works on the second TV,

then the customer has a problem with his TV.

Has the customer tried

another set of cables?

Have the customer try another set of cables. A bad cable can also

cause video problems. Test the cable with another device to

the TV to also determine if the TV is bad. If BD is problem,

please see service chart for service information.

2-2. Blue Screen

The entire screen is a solid blue color.

Summary of Contents for BPM54




























































































Search results

Summary of Contents for BPM54

Reviews:

Related manuals for BPM54

Brands by name

Popular brands

LG BPM54, Service Manual

Search results

Summary of Contents for BPM54

Reviews:

Related manuals for BPM54

Brands by name

Popular brands