7
T
uning
in a
V
ideo channel
On your
TV
Your TV receives signals from the video recorder (VCR) like another TV station.
You have to select a channel number on your TV and tune it in so that you may watch video
tapes.
If you have used a SCART lead then your TV should already have a dedicated video chan-
nel built into it, usually called AV.
The output frequency of
this video recorder (VCR)
is set at UHF channel 22.
If channel 22 is already
used by another TV
station, or if the picture is
distorted, you can
change the transmitter
channel of your VCR.
Stages 5~8 will show you
how to change the output
frequency of your VCR.
Make sure that you have
correctly installed your
VCR as described earlier
in this book.
Press POWER to turn on
your VCR.
Turn on your TV.
Insert a pre-recorded
video tape into your VCR
and press PLAY on the
remote control.
Select a TV channel
number on which you
wish to watch videos.
Don’t worry if you don’t have
a video-tape to play at this
stage!
If you switch your VCR on
and continue stages 3~4,
instead of seeing video
playback tune your TV until
you see a bright blue screen.
REC/
P/STILL
STOP
PLAY
REW
FF
Tune this channel until
the video picture is sharp
and the sound is clear.
If you have used a SCART
lead you will not have to tune
your TV, simply select the
AV channel. The AV channel
is already pre-tuned for opti-
mum video playback on your
TV
.
Store this channel on
your TV.
you will need to look at the
TV instruction book if you do
not know how to do this.
D
OK
i
