ADVANCED FUNCTIONS
17
ENGLISH
Disabling auto restart
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front cover.
- Lift up both sides of the cover slightly.
2
Press the On/Off button.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
- For cooling-only models, the temperature
is set to 22°C (71.6°F).
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings. This function is a factory de-
fault setting.
1
Open the front cover.
- Lift up both sides of the cover slightly.
2
Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp will
blink 6 times.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp will
blink 4 times.
* The feature can be changed according a
type of model.
* The feature can be changed according a
type of model.
ON/OFF
button
Room temp.
Set temp.
Operation
mode
Below 21°C
(69.8°F)
24°C (75.2°F)
Heating
operation
Above 21°C
(69.8°F) and
below 24°C
(75.2°F)
23°C (73.4°F)
Dehumidify-
ing operation
Above 24°C
(75.2°F)
22°C (71.6°F)
Cooling
operation
* The feature can be changed according a
type of model.
* The feature can be changed according a
type of model.
NOTE
!
If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
ON/OFF
button
Summary of Contents for AS-W093B1Y9
Page 22: ...22 ENGLISH ...
