LG AS-C09AW series Owner'S Manual Download Page 25

Page: 25 / 29

ENGLISH

Owner's Manual 25

Maintenance and Service

(Side)

(Rear)

Air intake
vents

Air outlet
vents

Piping

Drain Hose

(Side)

(Rear)

Air intake
vents

Air outlet
vents

Piping

Drain Hose

(Side)

(Rear)

Air intake
vents

Air outlet
vents

Piping
Drain Hose

Front panel

Panel

hook

Nano plasma filter

Cleaning Filter

• Recomended use period : About 3 months

Outdoor Unit

The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
If clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam cleaned.

Dirty or clogged coils will reduce the
operating efficiency of the system and
cause higher operating costs.

NOTICE

1. Open the upside of Front

panel.

2. Put up the front panel.

The hook of panel comes off.

3. Remove air filter and then pull

out the nano plasma filter.

4. Clean nano plasma filter with

the vacuum cleaner.

5. Relocate dried nano plasma

filter at the shade and then put
in air filter.

Summary of Contents for AS-C09AW series






























Search results

Summary of Contents for AS-C09AW series

Reviews:

Related manuals for AS-C09AW series

Brands by name

Popular brands

LG AS-C09AW series, Owner'S Manual

Search results

Summary of Contents for AS-C09AW series

Reviews:

Related manuals for AS-C09AW series

Brands by name

Popular brands