System Setting
22
S
ys
tem Se
tting
3
A/V SYNC menu (Adjusting
the audio delay)
You can delay the sound output using this function
when the image is slower than the sound.
1. Press
SETUP
.
"1 TESTTONE" appears on the display window.
2. Press
W/S
repeatedly until “4 A/V SYNC”
appears, then press
ENTER/SET
.
3. Press
A/D
to adjust the delay between sound
and image.
You can adjust from 0 MS to 300 MS in 10 MS
steps.
4. Press
BACK
to move to the previous menu.
Press
SETUP
to exit the setup menu.
You may not be able to adjust the delay
between sound and image perfectly using this
function.
,
Note
DOLBY DRC menu
This function allows you to listen to a movie at a
lower volume without losing clarity of sound. You
can compress the dynamic range of the Dolby
Digital audio output.
1. Press
SETUP
.
"1 TESTTONE" appears on the display window.
2. Press
W/S
repeatedly until “5 DOLBY DRC”
appears, then press
ENTER/SET
.
3. Press
A/D
to set the DRC.
- DOLBY DRC OFF : Deactivates this function.
- DOLBY DRC ON : Activates this function.
4. Press
BACK
to move to the previous menu.
Press
SETUP
to exit the setup menu.
Audio dynamic range compression lets you
compress the dynamic range of the soundtrack
based on the dynamic range information
included in the Dolby Digital signal.
,
Note
RESET menu
This allows you to initialize settings you have made
in the SETUP menu.
1. Press
SETUP
.
"1 TESTTONE" appears on the display window.
2. Press
W/S
repeatedly until “6 RESET” appears,
then press
ENTER/SET
.
“1 : YES 2 : NO” appears on the display window.
3. Press the numeric 1 to reset the unit to its
original settings.
If you don't want to reset it, press the numeric 2.
4. Press
BACK
to move to the previous menu.
Press
SETUP
to exit the setup menu.
NA9640D-FE_DGHALLK_ENG_2301.indd 22
2014-12-22 5:23:29
