background image

22   |   ProduCT dATA

Art Cool Premier W

all Mount Engineering Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

aCCESSoriES

The software is available in a high version with all of the features listed above. 

The low version has all features as the high version without Target High Pres-

sure and Target Low Pressure values shown on main screen. 

In lieu of connecting to the oDU, user has the option to connect to IDU with the 

use of a USB to RS-485 connector kit. When connected through IDU, user will 

not be able to record data.

This software can be used to both commission new systems and troubleshoot 

existing systems. LGMV data can be recorded to a “.CSV” file and emailed to 

an LG representative to assist with diagnostic evaluations.

recommended minimum Pc configuration:

• 

CPU: Pentium

®

 IV 1.6 GHz

• 

operating System: Windows

®

 

nT/2000/XP/Vista

• 

Main Memory: 256 MB

• 

Hard Disk: 600 MB when 

operating

• 

Web Browser: Internet  

Explorer

®

 5.0

LG monitoring View (LGmV) diagnostic Software and cable - continued

Figure 4:   MV Diagnostic Screen - High Version

Summary of Contents for Art Cool LAN120HYV















































Reviews: