InTroduCTIon | 11
Operation
Due to our policy of continuous product innovation, some specifications may change without notification.
unit OPeratiOn
initializing Operation of remote Control
To begin communication between the indoor unit and the remote control, point the remote control towards the signal receiver, located at
the bottom right hand corner of the indoor unit (see Figure 6).
• Make sure to point the remote control directly at the indoor unit, otherwise the remote might
accidentally activate and operate other electronic devices due to the signal being picked up.
• For optimum operation, periodically use a soft cloth to wipe the signal transmitter on the remote
control and the receiver on the indoor unit.
Single Zone Art Cool Gallery
remote Control, Indoor unit
indoor unit basic Components
Signal Receiver
Front Panel
Front Panel
Hooks (3)
Air Discharge
Air Filter
ON/OFF button
Refer to Figure 7 for the basic layout of the components of the Single Zone Art Cool Gallery indoor
unit, when following operational, maintenance or troubleshooting instructions in this manual.
Figure 7: Art Cool Gallery Indoor Unit Basic Components
Figure 6: Initializing Remote Control
