INSTALLATION
13
ENGLISH
INSTALLATION
Indoor unit installation
1
The mounting floor should be strong and
solid enough to prevent it from vibration.
2
Drill the piping hole with 70 mm diameter
hole-core drill at either the right or the left
of indoor unit. The hole should be sightly
slant to the outdoor side.
3
Insert the plastic tube through the hole.
4
Cut the extruded outside part of the plastic
tube, if necessary.
- When using knock-out hole to route
the piping, insert the plastic cover in
knock-out hole in order to prevent the
piping from damaged by sharp edge of
the hole.
* The feature may be changed according
to the type of model.
200 mm
70 mm
70 mm
90 mm
Wall
Core Drill
INSIDE
OUTSIDE
Tilt
Cut if
necessary
More
than 15 mm
Wall
Plastic tube
(Bushing)
INSIDE
OUTSIDE
Knock-out hole
Knock-out hole
• Install the product to remain horizontal
using the horizontal gauge.
• Do not damage cables when you install
the indoor unit. There is risk of fire or
electric shock.
<PT3>
<PF2>
CAUTION
!
Summary of Contents for ARNU96GPFA4
Page 21: ......
