background image

SAFETY INSTRUCTIONS

5

ENGLISH

Operation

• Take care to ensure that power cable could not be pulled out or damaged during operation.

There is risk of fire or electric shock.

• Do not place anything on the power cable. There is risk of fire or electric shock.

• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable. There is risk of fire and

electric shock.

• Do not allow water to run into electric parts. There is risk of fire, failure of the product, or

electric shock.

• Do not store or use flammable gas or combustibles near the product. There is risk of fire or

failure of product.

• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could

occur.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turning

the product on. Do not use the telephone or turn switches on or off. There is risk of explosion
or fire

• If strange sounds, or smell or smoke comes from product. Turn the breaker off or disconnect

the power supply cable. There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product

from the window before the hurricane arrives. There is risk of property damage, failure of
product, or electric shock.

• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,

if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

There is risk of fire or electric shock.

• Be cautious that water should not enter the product. There is risk of fire, electric shock, or

product damage.

• Ventilate the product from time to time when operating it together with a stove, etc. There is

risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product. There is risk of electric

shock.

• When the product is not to be used for a long time, disconnect the power supply plug or turn

off the breaker. There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody should step on or fall onto the outdoor unit. This could result

in personal injury and product damage.

CAUTION

Installation

• Always check for gas (refrigerant) leakage after installation or repair of product. Low

refrigerant levels may cause failure of product.

• Install the drain hose to ensure that water is drained away properly. A bad connection may

cause water leakage.

• Keep level even when installing the product. To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the

neighborhoods. It may cause a problem for your neighbors.

• Use two or more people to lift and transport the product. Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may

cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins,
could cause product malfunction or inefficient operation.

!

Summary of Contents for ARNU48GPTA4


















Reviews: