background image

ENGLISH

Safety Precautions  

Owner’s Manual  5

Do not allow water to run
into electric parts.

• It may cause  There is risk of

fire, failure of the product, or
electric shock.

Do not store or use flammable
gas or combustibles near the
product.

• There is risk of fire or failure of

product.

Do not use the product in a
tightly closed space for a
long time.

• Oxygen deficiency could occur.

When flammable gas leaks,
turn off the gas and open a
window for ventilation
before turn the product on.

• Do not use the telephone or

turn switches on or off. 
There is risk of explosion or fire

If strange sounds, or small or

smoke comes from product. Turn
the breaker off or disconnect the
power supply cable.

• There is risk of electric shock or

fire.

Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.

• There is risk of property

damage, failure of product, or
electric shock.

Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)

• There is risk of physical injury,

electric shock, or product
failure.

When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.

• There is risk of fire or electric

shock.

Be cautious that water
could not enter the product.

• There is risk of fire, electric

shock, or product damage.

Gasolin

Ventilate the product from time to time
when operating it together with a stove, etc.

• There is risk of fire or electric shock.

Turn the main power off when cleaning or
maintaining the product.

• There is risk of electric shock.

Summary of Contents for ARNU09GSF11


















Reviews: