
70
| GUIDELINES
MUL
TI V W
a
ll-Mounted Indoor Unit Engineering Manual
'XHWRRXUSROLF\RIFRQWLQXRXVSURGXFWLQQRYDWLRQVRPHVSHFL¿FDWLRQVPD\FKDQJHZLWKRXWQRWL¿FDWLRQ
©
/*(OHFWURQLFV86$,QF(QJOHZRRG&OLIIV1-$OOULJKWVUHVHUYHG³/*´LVDUHJLVWHUHGWUDGHPDUNRI/*&RUS
APPLICATION GUIDELINES
General Mounting
Figure 56: Choice of SB and SC Frame Wall-Mounted Indoor Unit Piping
/ Wiring Routes.
26-5/8
12-7/8
16-5/8
10-7/16
2-13/16
Unit: inches
SB Frame Wall-Mounted Indoor Unit
2-13/16
2-3/4
2-1/4
Right rear
piping
Left rear
piping
Installation Plate
Measuring Tape
Measuring Tape
Hanger
Place a level on raised tab
Unit Outline
8-3/16
4-3/16
18-1/8
22-1/2
2-13/16
Unit: inches
SC Frame Wall-Mounted Indoor Unit
General Mounting - Wall-Mounted
Wall-mounted indoor units have several options on how the piping and wiring can be routed (see figures below). Whichever way the piping
and wiring are routed out of the indoor units, the mounting wall on which the indoor unit is installed should be strong and solid enough to
protect it from vibration.
• Mount the installation plate on the wall using the Type “A” screws. If mounting the unit on concrete, consider using anchor bolts.
• Always mount the installation plate horizontally. Measure the wall and mark the centerline using thread and a level.
Front
Right
Rear right
Rear left
Down right
Left
Figure 57: Choice of SV Frame Wall-Mounted Indoor Unit Piping / Wiring
Routes.
Figure 58: SB and SC Frame Wall-Mounted Installation Plates.
Left rear piping
Right rear piping
1-11/16
5-1/2
5-29/32
6-9/16
Unit: inches
Unit Outline
6-9/16
1-11/16
SV Frame Wall-Mounted Indoor Unit
Figure 59: SV Frame Wall-Mounted Installation Plates.
Right
Back View
Tubing holder
Backwards
Left
Piping Port