System Set-Up
38
Hydro Kit
Installer Setting
How to enter installer setting mode
CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it could cause problems to the unit, user injury or
property damage. This must be set by an certificated installer, and any installation or change that is
carried out by a non-certificated person should be responsible for the results. In this case, free
service cannot be provided.
?)<-:
?)<-:
<-58
<-58
78-:
78-:
0-)<16/
0-)<16/
57,-
57,-
1
Function Code
Value
Press Function Setting button for 3 seconds
to enter the installer setting mode.
(When you enter the installer setting mode ini-
tially, function code is displayed on the bottom of
the LCD screen.)
Repeat pressing button, and the function code
will be changed.
Please refer the code table on the next page.
Summary of Contents for ARNH08GK3A2
Page 49: ......
