INSTALLATION
ENGLISH
13
Precautions when laying power
wiring
Use round pressure terminals for connections
to the power terminal block.
When none are available, follow the instruc-
tions below.
- Do not connect wiring of different thickness-
es to the power terminal block. (Slack in the
power wiring may cause abnormal heat.)
- When connecting wiring which is the same
thickness, do as shown in the figure below.
Power wire
Round pressure terminal
Connect same thickness
wiring to both sides.
It is forbidden to
connect two to one
side.
It is forbidden to
connect wiring of
different thicknesses.
- For wiring, use the designated power wire
and connect firmly, then secure to prevent
outside pressure being exerted on the termi-
nal block.
- Use an appropriate screwdriver for tightening
the terinal screws. A screwdriver with a
small head will strip the head and make prop-
er tighterning impossible.
- Over-tightening the terminal screws may
break them.
Remote Control Preparation
How to mount onto a wall
1
Remove the battery cover from the remote
controller.
- Slide the cover according to the arrow
direction.
2
Insert the two batteries.
- Be sure that the (+) and (-) directions are
correct.
- Be sure that both batteries are new.
3
Re-attach the cover.
- Slide it back into position.
- Do not use rechargeable batteries, such bat-
teries differ from standard dry cells in shape,
dimensions, and performance.
- Romove the batteries from the remote con-
troller if the air conditioner is not going to be
used for some long time.
Summary of Contents for AMNQ12GTRA1
Page 21: ......
