manualshive.com logo in svg

LG AMNH05GD4L0, Owner'S Manual

Share
Download
LG AMNH05GD4L0 Owner'S Manual Download Page 24

24

Room Air Conditioner

(Side)

(Rear)

Air intake
vents

Air outlet
vents

(Side)

(Rear)

Air intake
vents

Air outlet
vents

Piping

Drain Hose

Piping

Drain Hose

Maintenance and Service

Outdoor Unit

The heat exchanger coils and panel vents of the outdoor unit should be checked regularly. 
If clogged with dirt or soot, the heat exchanger 
and panel vents may be professionally steam cleaned.

Dirty or clogged coils will reduce the 
operating efficiency of the system and 
cause higher operating costs.

NOTICE

Replacement of purifying filter (Optional)

Recomended use period : About 2 years

1. Remove front panel and air filters.
2. Remove air purifying filters.
3. Insert new air purifying filters.
4. Reinsert air filters and close front panel.

Type 1: 

Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.

Type 2: 

Pull the front panel from both sides as shown. 
Then pull the filter tab slightly forward to remove the filter. After removing the air filter remove
the plasma and triple deodorizer filter by slightly pulling forward.

Plasma filter

Deodorizer�
filter

Plasma filter

Deodorizer�
filter

Summary of Contents for AMNH05GD4L0




























Reviews:

No comments

Brands by name

Popular brands

Load more brands