22
INSTALLATION OF UNIT
ENGLISH
Trial Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
Function Code
Set
Press button to start.
3
During the test run, pressing the below button will
exit the test run.
- Select operation, temperature up/down, wind flow
control, wind direction, start/stop button.
4
If pressing button long for 3 seconds, it enters
into remote controller setter setup mode.
- If pressing once shortly, it enters into user setup
mode. Please press more than 3 seconds for sure.
- Please cancel the right and left of wind direction for
RAC product.
1
Setup figure '01' blinks at the lower part of indication
window.
2
