background image

SAFETY PRECAUTIONS

5

ENGLISH

Changes or modifications not expressly approved by the manufacturer responsible for com-
pliance could void the user’s authority to operate the equipment.

CAUTION

!

Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product

it means the product is covered by the European Directive
2002/96/EC.

2. All electrical and electronic products should be disposed of separate-

ly from the municipal waste stream via designated collection facili-
ties appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance,

please contact your city office, waste disposal service or the shop
where you purchased the product.

NOTE

!

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.

According to IEC 60335-1

This appliance is not intended for use by person (including children) with reduced physical, or
mental capabilities, or lack of experience and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

According to EN 60335-1

This appliance can be used by children aged from 8 years and above and person with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.

• Transformer selection:

- Select an insulating product that complies with IEC61558-2-6 and NEC Class 2.

- In addition, consider the combined power consumption of the modules, accessories, and

field devices installed for the selection of an appropriate transformer.
Main module current: 24 V~, 850 mA

- Use the provided adaptor when using DC 12 V. The adaptor is not provided with the AC

Manager 5 package sold in the U.S.

Class A device

Summary of Contents for AC MANAGER 5














Reviews: