background image

SAFETY PRECAUTIONS

ENGLISH

!

 

CAUTION

 

Installation

• Always check for gas (refrigerant) pressure after installation or repair of product.

- Low refrigerant levels may cause failure of product.

• Install the drain hose to ensure that water is drained away properly.

- A bad connection may cause water leakage.

• Keep level even when installing the product.

- To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the neigh-

borhoods.

- It may cause a problem for your neighbors.

• Use two or more people to lift and transport the product. Avoid personal injury.
• Do not install the product where it will be exposed to sea wind (salt spray) directly.

- It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator

fins, could cause product malfunction or inefficient operation.

Operation

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.)

- This could harm to your health.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. 

- There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow. -

It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.

-  There is risk of fire, electric shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. They are very sharp! -

There is risk of personal injury.

• Do not step on or put anything on the product. (outdoor units)

- There is risk of personal injury and failure of product.

• Always insert the filter securely. Clean the filter every four weeks or more often if necessary.

- A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or

damage.

• Do not insert hands or other objects through the air inlet or outlet while the product is operated. -

There are sharp and moving parts that could cause personal injury.

• Do not drink the water drained from the product.

- It is not sanitary and could cause serious health issues.

• Use a firm stool or ladder when cleaning or maintaining the product.

- Be careful and avoid personal injury.

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or

explode.

5

Replace the all batteries in the remote control with new ones of the same type. Do not mix old and 

new batteries or different types of batteries. There is risk of fire or explosion.

If the liquid from the batteries gets onto your skin of clothes, wash it well with clean water. Do not use 

the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health 

hazards.

If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if 

the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

Summary of Contents for ABNQ30GM2T2





















Reviews: