OPTIONAL OPERATION
ENGLISH
31
Installer Setting - Group Setting
It is a function for settings in group control, or 2-remote controller control.)
Select the remote control master/slave
using button.
3
4
1
Move to the Master/slave selection in the
menu using button and then it displays
as below.
2
5
Press and hold button for more
than 3 seconds to enter the installer
settings mode.
- If pressing only once briefly, it will
enter the user settings mode.
Make sure to press and hold for more
than 3 seconds.
❈
Set value for remote control
00 : Slave
01 : Master
Code value for remote
control master/slave
Set value
Press button to save the setting.
Press button to exit.
If no button is selected for about
25 seconds after setup, it exits the setup
mode automatically.
If the button is not selected before you
exit, the changes will not apply.
Remote controller
Function
Master
Indoor unit operates based on master remote controller at group
control. (Master is set when delivering from the warehouse.)
Slave
Setup all remote controllers except one master remote controller
to slave at group control
* Refer to the 'group control' part for details
NOTE
!
Some functions may not be available during a group control except basic operation settings,
fan speed low/med/high, remote control lock setting, time setting.
Summary of Contents for ABNQ18GM1T0
Page 38: ...38 ENGLISH ...
