background image

18

Room Air Conditioner

Maintenance and Service

3. Deluxe (Type 1): 

Open the upside of the panel and lift it up as shown. The hooks of the panel will come off. Remove the
air filters. Then pull out the plasma filter

4. Deluxe (Type 2): 

Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.

After cleaning and drying well reinstall the filters in their original position.

Front panel

Panel hook

Plasma filter

Plasma filter

Front panel

5. Standard Split Type : Two different methods to open the front panel based on types of air

conditioner as below ; 

Type 1: 

Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.

How to use the front panel

1. Front panel closing

Move the link upward and close the front panel.

2. Front panel removing

Raise the link up to hook  hanger and remove
front panel forward.

Plasma filter

Deodorizer
filter

Summary of Contents for A246MP





















Reviews: