24
ENG
ENGLISH
ENTERTAINMENT
ENTERTAINMENT
Connecting to a Network
(Depending on model)
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustra-
tion and set up the network settings.
This monitor only supports a wired network
connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
LAN
Router
LAN
WAN
Cable modem
ETHERNET
@
Internet
Internet
y
Network setting menu will not be available
until the display is connected to physical
network.
CAUTION
y
Do not connect a modular phone cable to the
LAN port.
y
Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
Follow the steps below to set up the network set-
tings. (Even if your display is already connected
automatically, running setup again will not harm
anything.)
1
Press
SETTINGS
to access the main menus.
2
Press the Navigation buttons to scroll to
NET-
WORK
and press
OK
.
3
Press the Navigation buttons to scroll to
Net-
work Connection
and press
OK
.
4
Select
Start Connection
.
5
Select
Complete
or
Other Network List
.
If you select
Complete
, you can use wired
network in this connection. If you don’t want,
select
Other Network List
.
6
Select
Set Expert
.
7
Select
Wired
or
Wireless
.
8
Select
Manual Input
or
Auto Input
.
If you select
Manual Mode
, press the Navi-
gation and Number buttons. IP addresses will
need to be input manually.
-
Auto Input
: Select this if there is a DHCP
server (router) on the Local Area Network
(LAN) via wired connection, the display
will be automatically allocated an IP ad-
dress. If you’re using a broadband router
or broadband modem that has a Dynamic
Host Configuration Protocol (DHCP) server
function, the IP address will be automatically
determined.
9
When you are finished, press
EXIT
.
