Introductions of GP4 Sensor (Touch IC)
Touch EEPROM Register change with USB port
1. Write all of the address,
value (
Hex
) as a below.
capable of only Touch.txt file
based on the left picture
2. Make the file
[ Filename :
‘Touch.txt’ ]
and move it to USB
(The outermost area, Don’t move
it to any folder)
3. Connect USB to TV and press
button ‘ADJ menu’ and then
choose the ‘touch sensitivity
setting’
4. Press button ‘SIMPLINK
(Simply Link key)’ and then you
can see the OK Pop up.
5. After that, you check it the IR
LED version on In-start menu and
verify it that the number of
version is changed to what you
want.
Add Value
Copyright © 2012 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
LGE Internal Use Only
Summary of Contents for 84LM96/W
