ENGLISH
13
Installing on a Wall
For proper ventilation, make sure the product is installed at least 100 mm away from the walls on every side. Consult a
professional installation company near you for details on installation.
100 mm
100 mm
100 mm
100 mm
Use the side screw holes when mounting the panel.
•
Side screw hole: M8, Torque - 17 Kgf to 27 Kgf (Bottom side: 8 holes, Left, Right Sides: each of 8 holes)
•
Please use the 18.0 mm to 25.0 mm screws.
CAUTION
•
Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•
If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. The product should be installed by
a professional installation company specified by the retail store.
•
Do not over tighten the screws as this may damage the monitor and void your warranty.
•
Any damage or injuries caused by misuse or use of improper accessories are not covered by the warranty.
•
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
(This pertains only to Australia and New Zealand.)
NOTE
•
Be sure to use the correct length.