LG 55VH7B Owner'S Manual Download Page 100

Page: 100 / 106

Fail Over Menu

The input source with the highest priority will be selected.

Off

•

The Auto-Fail Over feature is disabled.

Auto

•

The input source changes according to the specified order. When several input sources are found, the input source

with the highest priority will be selected.

•

Priority
Case 1) 1. HDMI, 2. DVI-D, 3. DISPLAYPORT, 4. OPS, 5. RGB, 6. Internal Memory
Case 2) 1. HDMI1, 2. HDMI2, 3. OPS/HDMI3/DVI-D or OPS/DVI-D, 4. DP, 5. Internal Memory

Manual

•

The input source changes according to the specified order. When several input sources are found, the input source

with the highest priority will be selected.

•

You can set Priority 1 - Priority 6.

NOTE

•

If the input switches to the Internal Memory, USB, or SD Card due to Fail Over, the content, videos, or images in the

storage device will be played.

•

If there is content (cts or cpls) located in the fail_over (FAIL_OVER) folder in the root directory of the storage device,

the content will be played first.

•

If there is no content, the videos or images stored in the root directory of the storage device will be played.

•

If there are both video files and image files in the same folder, then only the video files will be played.

•

Content distributed by SuperSign will be saved in the folder named 'normal' in the internal memory. Therefore,

content distributed by SuperSign will not be automatically played due to Fail Over.

•

The number of priorities may vary depending on the model.

ENGLISH

Summary of Contents for 55VH7B











































































































Search results

Summary of Contents for 55VH7B

Reviews:

Related manuals for 55VH7B

Brands by name

Popular brands

LG 55VH7B, Owner'S Manual

Search results

Summary of Contents for 55VH7B

Reviews:

Related manuals for 55VH7B

Brands by name

Popular brands