LG 55VH7B-A User Manual Download Page 3

Page: 3 / 54

ENGLISH

User Settings

Main Menu Settings

Picture Settings

To Select Picture Mode

Advanced

Picture

Picture Mode Settings

Picture Mode

Select the picture mode that is best suited to the video type

•

Vivid:

adjusts the video image for a retail environment by enhancing the

contrast

brightness

, and

sharpness

•

Standard:

adjusts the video image for a normal environment.

•

APS:

APS (Auto power saving ) mode reduces power consumption by dimming control.

•

Cinema:

optimizes the video image for watching movies.

•

Sports:

optimizes the video image for watching sports. Even fast actions such as kicking or throwing a ball

are rendered clearly on the screen.

•

Game:

optimizes the video image for playing videogames.

•

Photo:

Optimizes the screen for viewing photos. (This feature is available only with certain models.)

•

Expert/Calibration:

allows an expert, or anyone interested in high quality pictures, to manually tune the

picture for the best picture quality.

•

Depending on the input signal, the available

Picture Mode

s may differ.

•

Expert

is an option that allows a picture quality expert to fine-tune the picture quality using a specific

image. Thus, it may not be effective for a normal picture.

NOTE

•

The software-related contents may be changed without prior notice due to upgrade of the product
functions.

•

Some features described in the Installation manual may not be supported in certain models.

•

SNMP 2.0 is supported.

NOTE

Summary of Contents for 55VH7B-A























































Search results

Summary of Contents for 55VH7B-A

Reviews:

Related manuals for 55VH7B-A

Brands by name

Popular brands

LG 55VH7B-A, User Manual

Search results

Summary of Contents for 55VH7B-A

Reviews:

Related manuals for 55VH7B-A

Brands by name

Popular brands